• Setup (For Installation Operators) Installation operators are persons who have undergone installation training at Janome or at a representative branch. People responsible for installation work should complete this training. Thank you for purchasing this Janome Robot. Before using your robot, please read this manual thoroughly and always make sure you use the robot correctly. • PREFACE The Janome Desktop Robot JR3000 Series are new, low-cost, high-performance robots. With these robots we succeeded in reducing the price while maintaining functionality. The combined use of stepping motors and specialized micro step driving circuits saves both energy and installation space. ![]() Janome 525S Instruction Manual Model 525S Janome 525S Sewing Machine Instruciton Manual www.janomeflyer.com 525S Owners Manual/ User Guide. JanomeFlyer.com IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic safety precautions should always be followed, including the. The base is made of a single aluminum alloy die cast and the column is from an aluminum alloy extrusion with a highly rigid cross section which gives the robot. La noia alberto moravia pdf free. Janome Foot Controls. Juki Foot Controls. Kenmore Foot Controls. Pfaff Foot Controls. Butler robotics manual Download. 7' or 10' Android Tablet. Quilt EZ Butler Quilting Robot w/ 7 Inch Android Tablet! View these videos to get a better idea of what you'll purchase! • Failure to do so could cause electric shock and/or injury. New pokemon hack roms. Do not handle or operate the robot in ways not covered in the manuals listed on the previous page. Contact Janome (listed on the Warning back page of this manual) for repairs. • FOR YOUR SAFETY..5 1. SYSTEM CONFIGURATION..13 2. INSTALLATION..14 2.1 Common to the JR3200 Series..15 2.2 Common to the JR3300 Series..16 2.3 Common to the JR3400 Series..17 2.4 Teaching Pendant Hanging Ring..18 2.5 Cable Connection.. • 8.2.1 Changing Program Numbers..45 8.2.2 Program Number Reading Format.45 8.2.3 Program Number Switching Method.46 8.3 I/O-S Settings (Optional)..47 9. CONVERTING JR2000/JR2000N DATA TO JR3000 DATA.48 Setup Desktop Robot JR3000. • FOR YOUR SAFETY The safety notes outlined below are provided in order to ensure safe and correct usage of the product in addition to preventing injury to the operator, other people and damage to property as well. ・・・・・ Be sure to follow the safety guidelines detailed here ・・・・・ Symbols are also listed alongside the safety note explanations. • FOR YOUR SAFETY If using auxiliary axis functions to operate a motor, such as a servo motor, that produces feedback and/or a motor with high output etc., or when using auxiliary axes in the formation of a robot etc., we ask that you perform a risk assessment on your side and take any necessary safety measures. • FOR YOUR SAFETY If Using Auxiliary Axis Functions in a Way that Require Safety Measures Danger When power to the robot is ON, never enter the safety enclosure or put your face, hands, or any part of your body inside. Failure to do can result in injury. • FOR YOUR SAFETY If Using Auxiliary Axis Functions in a Way that Require Safety Measures Warning Construct a safety enclosure that is strong enough to protect the operator against such dangers as the tool or workpiece splintering, etc. When working within the safety enclosure, use protective gear such as a helmet, protective gloves, protective goggles, and safety shoes. • FOR YOUR SAFETY Danger Do not use where flammable or corrosive gas is present. Leaked gas accumulating around the unit causes explosions and fire. Warning Make sure that you securely install the unit in a place that can fully withstand both the unit’s weight and its usage. • FOR YOUR SAFETY Warning Always make sure the machine is grounded through the power cord. Do not use the machine when it is not grounded. Improper grounding causes electric shocks, fires, malfunction, and unit breakdown. Wipe the power plug with a clean, dry cloth periodically to eliminate dust. Dust accumulation deteriorates the electrical insulation and causes fires. • FOR YOUR SAFETY Caution Do not drop or jar the unit during transport and/or installation. This causes injuries or damages the unit. Before performing any operation, ensure there is no imminent danger to any of the operators. Failure to do so causes injury. Use the unit in an environment between 0 and 40°C, with a humidity level of 20 –. • FOR YOUR SAFETY Caution When attaching tools etc., make sure they are securely fitted before running the robot. Failure to do so causes injury or breakdown. When using the machine for extended periods of time, check and make sure none of the main unit’s mounting screws are loose, and perform a routine inspection every 3 months. SYSTEM CONFIGURATION Teaching Pendant (Optional) Robot Example: JR3203N-BC Switchbox (Switchbox specification robots only) with a Windows® 7 / 8 / 8.1 operating system Tool* Dispenser, Electric Screwdriver, etc. Area Sensor, etc. Janome Robot Manual* RS-232C Windows is a registered trademark of Microsoft Cable* Not included An RS-232C port on the back of the robot is optional. INSTALLATION Danger Do not use where flammable or corrosive gas is present. Leaked gas accumulating around the unit causes explosions and fire. Warning Make sure that you securely install the unit in a place that can fully withstand both the unit’s weight and its usage. Install the robot and switchbox on a workbench 60cm or higher above floor level, and install the robot in the center of the workbench. Free Janome Manual Download• 2.1 Common to the JR3200 Series NOTE When installing, rotate the rubber feet to adjust the height. Be sure to make them stable. Janome Artistic Robot ManualExample: JR3203N-AC -φ (Rubber Feet) 4-M8 There are four rubber feet (ϕ30). The values within the brackets above are for reference only. • 2.2 Common to the JR3300 Series Example: JR3303N-AC -φ (Rubber Feet) 4-M8 (15.5) There are four rubber feet (ϕ27). NOTE • The robot may rattle depending on the tool mass. If so, be sure to secure the unit. To secure the unit, remove the rubber feet and use the 4 M8 screw holes used for fastening the rubber feet, with spacers of a height of 20mm or more (due to protrusions). • 2.3 Common to the JR3400 Series Example: JR3403N-AC 4-φ27 (Rubber Feet) 4-M8 (15.5) There are four rubber feet (ϕ27). Janome Desktop RobotNOTE • The robot may rattle depending on the tool mass. If so, be sure to secure the unit. To secure the unit, remove the rubber feet and use the 4 M8 screw holes used for fastening the rubber feet with spacers of a height of 20mm or more (due to protrusions). • 2.4 Teaching Pendant Hanging Ring You can attach the hanging ring included in the package to the teaching pendant to hang it up. Also, if you are using the teaching pendant as a monitor during use in Run Mode, install at an easy to operate height of 60cm or higher from the ground. • 2.5 Cable Connection 2.5.1 JR3200 Series Installed Switch Specifications Front View (Example: JR3203N-AC) Fieldbus * (optional) Screw Holes Teaching Pendant MEMORY COM1: RS-232C Screw Holes FB Cover For models equipped with a Fieldbus (DeviceNet, CC-Link only), attach the included FB Cover to the main unit with the screws included to protect the terminal. • Rear View (Example: JR3203N-AC/BC) COM2: RS-232C (optional) COM3: RS-232C (optional) I/O-SYS I/O-1 or I/O-MT(optional) Area Sensor etc. I/O-S (optional) I/O-S Connector (optional) INLET Power Cord If you do not connect a safety device such as an area sensor*, connect the included I/O-S connector* with the two lead wires short circuited. • 2.5.2 JR3300 Series Installed Switch Specifications Front View (Example: JR3303N-AC) Teaching Pendant MEMORY COM1: RS-232C Switchbox Specifications Front View (Example: JR3303N-BC) Switchbox Install the switch box 60cm or higher from the floor and at a height convenient for operation. Setup Desktop Robot JR3000. • Rear View (Example: JR3303N- AC/BC) I/O-MT (optional) COM2: RS-232C (optional) COM3: RS-232C (optional) Screw Holes I/O-SYS I/O-1 (optional) Screw Fieldbus * Holes (optional) FB Cover Area Sensor I/O-S (optional) I/O-S Connector (optional) OUTLET (Depending on the specs, the robot may or may not have an outlet and the shape may vary.) INLET. • 2.5.3 JR3400 Series Installed Switch Specifications Front View (Example: JR3403N-AC) Teaching Pendant MEMORY COM1: RS-232C Installed Switchbox Specifications Front View (Example: JR3403N-BC) Switchbox Install the switch box 60cm or higher from the floor and at a height convenient for operation.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |